Home » Products » Rotary Screw Air Compressors » Variable Speed Rotary Screw Air Compressors
AIR SUPPLY THAT FOLLOWS DEMAND
Compare RUEGO variable speed rotary screw air compressors for changing air demand. Explore configurations and get help selecting the right system.
EXPLORE THE RANGE
Compare the package, working pressure and air delivery. Open the product details for model specifications and configuration options.
Power
10-350 HP
Pressure
8 / 10 / 12 bar
Air delivery
0.72-42.3 m³/min
Control Type
PM VSD
Power
20-50 HP
Pressure
16 bar
Air delivery
1.62–3.99 m³/min
Control Type
PM VSD
Power
3-10 HP
Pressure
8-10 bar
Air delivery
0.27-1.1 m3/min
Control Type
PM VSD
Power
50–300 HP (37–220 kW)
Pressure
5 bar
Air delivery
8.2-63.0 m³/min
Control Type
PM VSD
Power
50–675 HP (37–500 kW)
Pressure
8 / 10 / 12.5 bar
Air delivery
5.2-100.0 m3/min
Control Type
PM VSD
THE OPERATING PRINCIPLE
A variable speed screw compressor uses pressure feedback and PID control to adjust motor speed smoothly. It speeds up when air demand rises and slows down when demand falls, matching output to actual use.
This reduces repeated loading and unloading, cuts wasted electricity and keeps pressure steady. Tighter pressure control also supports a lower operating pressure while meeting equipment needs.
01
A sensor tracks pressure changes in the air system.
02
The controller signals the drive to change motor speed.
03
The screw airend delivers more or less air as demand changes.
MATCH THE DRIVE TO YOUR DEMAND
Variable speed compressors match air output to changing demand, reducing unloaded energy use and keeping pressure steady. Fixed speed compressors suit sustained, near-full-load operation. Compare how each controls airflow, uses energy and works in a multi-compressor system.
| Compare | Variable Speed (VSD) | Fixed Speed |
|---|---|---|
| Output control | Continuously adjusts motor speed to actual air demand, increasing output when more tools run and slowing down as demand falls. | Runs at a constant motor speed; controls output through loading/unloading or inlet regulation. |
| Best fit | Production with large changes in air use across shifts or processes, where adjusting output reduces time spent running unloaded. | Steady demand that keeps the compressor close to full load. |
| Energy use | Slows the motor when less air is needed, reducing the electricity wasted in repeated load/unload cycles. Tighter pressure control also reduces energy spent compressing air above the pressure your equipment needs. | Efficient at sustained full load. Under changing demand, load/unload control keeps the motor running during unloaded periods, consuming electricity without delivering useful air. |
| Pressure control | PID feedback and stepless speed adjustment keep pressure close to the target as air demand changes. This supports a lower pressure setting that still meets equipment needs, without the wide pressure swings of load/unload operation. | Load/unload control builds pressure to a higher unloading limit before output stops. Pressure then falls to the loading limit, creating a wider pressure band and a higher average pressure to maintain the minimum supply required. |
| Multi-compressor systems | Handles changing demand as the trim compressor. | Supplies the steady base load while the trim compressor adjusts. |
FROM AIR REQUIREMENT TO EQUIPMENT
01 / SIZING
Start with pressure at the tools, then account for dryer, filter and pipe losses. Size for peak demand and check minimum demand against the compressor’s operating range. Compare air delivery at the required pressure before choosing HP.
02 / LAYOUT
Use a standalone unit with your existing air treatment, a tank-mounted package for compact storage, or an integrated system that combines compression, storage, drying and filtration. Allow room for cooling and service access.
03 / COMPRESSION
VSD control can work with either arrangement. Two-stage compression raises air pressure in two successive steps. Compare complete-package performance at your required pressure and flow.
Explore Two-Stage Screw Compressors →04 / INSTALLATION
Provide the site voltage, phase, frequency and available electrical capacity. Review ventilation, ambient temperature, dust and moisture, plus control compatibility when connecting to other compressors.
PLAN THE COMPLETE AIR SYSTEM
Check how many machines run together and the pressure needed at clamps, tool changers and other air users.
Map the production cycle and short bursts of air use. Set moisture and contamination limits for the equipment and process.
Review shifts, existing compressors and remote use points. Include pipe losses and receiver capacity when planning central supply.
A receiver buffers short demand peaks. A dryer controls moisture vapor; filters target particles and oil aerosols. Select treatment for flow, pressure, inlet temperature and required pressure dew point, with drains to remove condensate.
For oil-sensitive processes, define the required air quality before choosing the compressor and treatment package.
LET’S SIZE YOUR AIR SUPPLY
Tell us what your equipment needs. We’ll help you compare the compressor, storage and air treatment options.
Get Selection SupportFor an upgrade, add the existing compressor details and any operating records.
Discuss your logo, colors, nameplate, packaging and manuals, together with the electrical and system configuration for your project.
BUYER QUESTIONS
What is the difference between VSD and VFD?
VSD is the broader term for variable speed control. A VFD changes the electrical frequency supplied to an AC motor to control its speed. In screw compressor listings, both terms commonly describe a compressor with electronic speed control.
Does every VSD compressor use a permanent magnet motor?
No. Variable speed control can be paired with different motor technologies, including induction and permanent magnet motors. Compare the motor and drive configuration shown in the product details.
Can a VSD compressor work with my existing air system?
Yes. Match its pressure, capacity range and controls to the existing equipment. In a multi-compressor system, a VSD unit can handle demand changes while fixed-speed units supply the steady load. Check receiver capacity and air treatment at the same time.
What power supply details should I provide?
Share your site voltage, phase, frequency and available electrical capacity, along with any required certifications. We use these details to match the compressor’s electrical configuration to your site.
What maintenance does a VSD screw compressor require?
Follow the model’s service schedule for filters, lubricant and separators where fitted. Keep coolers and cabinet ventilation clear, check condensate drains, and review controller alarms and running temperatures.
Tell us which products you are considering and how you plan to use them. Share any requirements you already know.
Tell us which products you need and your requirements. Our team will help with selection and prepare a quotation.
Share what you know. If you’re unsure about pressure or airflow, tell us what equipment you use and we’ll help with selection.
Only name and email are required.